Has anyone used the Zipato Double Relay Module. I have it working but it or HS3 is not reporting the correct ON states for the relays, I get the following:
Relay 1 turned on only - relay 2 shows on from a software stand point but it is physical not on.
Relay 2 tuned on or off only works OK, relay 1 shows no change of its current state as it should be.
There is a control that will turn relay 1 & 2 on together when this is selected both relays physicaly come on but relay 1 software wise shows off.
Relay 1 turned on only - relay 2 shows on from a software stand point but it is physical not on.
Relay 2 tuned on or off only works OK, relay 1 shows no change of its current state as it should be.
There is a control that will turn relay 1 & 2 on together when this is selected both relays physicaly come on but relay 1 software wise shows off.