Hi Mark,
Here is the log details for the UK Type A19 LED Bulb - http://www.smarthome.com/insteon-a19...se-europe.html
We also have the following one for Europe which does work - http://www.smarthome.com/insteon-a19...se-europe.html
The one that is not recognised is the first one. It is literally the same device but with a different fitting.
In the hub it is recognised as Device Details x01x4Cx48
Many Thanks,
Aug-23 19:17:45 Insteon PLMBuffer_Clean - Cleared 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to locate next possible STX
Aug-23 19:17:45 Insteon Received a Broadcast message from 2F.38.0F: 01 2F 38 0F 01 4C 48 87 01 40
Aug-23 19:17:45 Insteon Received STX 0x50 (Raw Insteon Rec):2F 38 0F 01 4C 48 87 01 40
Aug-23 19:17:45 Insteon Sending http://192.168.0.35:25105/1?XB=M=1
Aug-23 19:17:45 Insteon ..My XML buffer begins with: 02502F380F014C4887014
Aug-23 19:17:42 Insteon BackgroundUpdate Thread Complete...
Aug-23 19:17:42 Insteon The Device Type is not supported. Check the HS Log for additional information.
Aug-23 19:17:42 Insteon Scheduled polling resumed.
Aug-23 19:17:42 Insteon Note: This message will be eliminated once the device type is added to the plugin.
Aug-23 19:17:42 Insteon Please post this new device type in the forum so it can be permanently added to the plugin.
Aug-23 19:17:42 Insteon An unknown Insteon device of type 014C was found.
Aug-23 19:17:42 Insteon PLMBuffer_Clean - Cleared 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to locate next possible STX
Aug-23 19:17:42 Insteon Got controller/responder type broadcast for Insteon ID 2F.38.0F of type 014C, Firmware version 48
Aug-23 19:17:42 Insteon Received a Broadcast message from 2F.38.0F: 01 2F 38 0F 01 4C 48 87 01 40
Aug-23 19:17:42 Insteon Received STX 0x50 (Raw Insteon Rec):2F 38 0F 01 4C 48 87 01 40 Debouncing repeat.
Aug-23 19:17:42 Insteon Received STX 0x50 (Raw Insteon Rec):2F 38 0F 01 4C 48 87 01 40
Aug-23 19:17:42 Insteon Sending http://192.168.0.35:25105/1?XB=M=1
Aug-23 19:17:42 Insteon ..My XML buffer begins with: 02502F380F014C4887014002502F380F014C4887014
Here is the log details for the UK Type A19 LED Bulb - http://www.smarthome.com/insteon-a19...se-europe.html
We also have the following one for Europe which does work - http://www.smarthome.com/insteon-a19...se-europe.html
The one that is not recognised is the first one. It is literally the same device but with a different fitting.
In the hub it is recognised as Device Details x01x4Cx48
Many Thanks,
Aug-23 19:17:45 Insteon PLMBuffer_Clean - Cleared 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to locate next possible STX
Aug-23 19:17:45 Insteon Received a Broadcast message from 2F.38.0F: 01 2F 38 0F 01 4C 48 87 01 40
Aug-23 19:17:45 Insteon Received STX 0x50 (Raw Insteon Rec):2F 38 0F 01 4C 48 87 01 40
Aug-23 19:17:45 Insteon Sending http://192.168.0.35:25105/1?XB=M=1
Aug-23 19:17:45 Insteon ..My XML buffer begins with: 02502F380F014C4887014
Aug-23 19:17:42 Insteon BackgroundUpdate Thread Complete...
Aug-23 19:17:42 Insteon The Device Type is not supported. Check the HS Log for additional information.
Aug-23 19:17:42 Insteon Scheduled polling resumed.
Aug-23 19:17:42 Insteon Note: This message will be eliminated once the device type is added to the plugin.
Aug-23 19:17:42 Insteon Please post this new device type in the forum so it can be permanently added to the plugin.
Aug-23 19:17:42 Insteon An unknown Insteon device of type 014C was found.
Aug-23 19:17:42 Insteon PLMBuffer_Clean - Cleared 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to locate next possible STX
Aug-23 19:17:42 Insteon Got controller/responder type broadcast for Insteon ID 2F.38.0F of type 014C, Firmware version 48
Aug-23 19:17:42 Insteon Received a Broadcast message from 2F.38.0F: 01 2F 38 0F 01 4C 48 87 01 40
Aug-23 19:17:42 Insteon Received STX 0x50 (Raw Insteon Rec):2F 38 0F 01 4C 48 87 01 40 Debouncing repeat.
Aug-23 19:17:42 Insteon Received STX 0x50 (Raw Insteon Rec):2F 38 0F 01 4C 48 87 01 40
Aug-23 19:17:42 Insteon Sending http://192.168.0.35:25105/1?XB=M=1
Aug-23 19:17:42 Insteon ..My XML buffer begins with: 02502F380F014C4887014002502F380F014C4887014