Hi,
I'm trying to add an Aeon Labs Multi Sensor Gen5, I'm getting errors below about it not being able to determine a SECURITY SCHEME.
Tried removing and adding multiple times.
I added the sensor by removing the zstick and adding it there, for some reason the HS "add to network" function doesn't work for me (it doesn't detect I've pressed the zwave button on the sensor)
Would greatly appreciate any help!
I'm trying to add an Aeon Labs Multi Sensor Gen5, I'm getting errors below about it not being able to determine a SECURITY SCHEME.
Tried removing and adding multiple times.
I added the sensor by removing the zstick and adding it there, for some reason the HS "add to network" function doesn't work for me (it doesn't detect I've pressed the zwave button on the sensor)
Would greatly appreciate any help!
Code:
Loading network information from your Z-Wave interface...
Done.
Synchronizing network information against HomeSeer devices...
Getting Z-Wave node list for network xxxxxx
Found 4 Z-Wave nodes
Syncing Z-Wave nodes with device list...
Synchronize nodes finished. Number of device nodes to be created/added = 1
Device synchronization needs to get Z-Wave class information for one node.
Z-Wave manufacturer information for node 6, ID: 134=86H (Aeon Labs), Type: 514=202H, ID: 74=4AH
Negotiating or Verifying SECURITY SCHEME for node 6
Warning: Failed to get a SECURITY SCHEME or verify the key from node 6. Device may not be added properly to HomeSeer.
Warning: The security device may have a timeout when adding to the network, bring the device close to HomeSeer and use the Add Node button to add it (remove it first)
Warning: If this device was previously added to the network, the device may need to be removed from the network and re-added.
Warning: In case the device was previously added successfully, an attempt will be made to continue the import.
Getting SECURITY class information for node 6
Error: Security class information is NOT present - cannot continue loading node 6
Warning: The device at node 6 should result in 4 child devices being created, but the node interrogation currently has 0. This may still result in a successful child creation.
Finished with Z-Wave device synchronization.