Spud,
In the following snip you can see that the Humidity device has not updated for several days. The actual humidity is at 38% on one of my Aeon MS5's which is about 15 feet away.
Attachment 56430
I also wanted to ask if an enhancement was possible: In that picture you'll notice the fan is on, however the HVAC Status is idle which is not accurate.
The HVAC system is in a mode that I refer to as Equalizing or Recirculating using the fan only. My mode is in heating but it will only come on at the setpoint however it performs equalization in between the heating or cooling cycles. For the summer I have this mode set to run 1/2 hour/hour. It cycles cooler air from the basement throughout the house and has helped make the house comfortable with minimum use of AC. In winter it makes for an uncomfortable house because it blows cooler air so the perception is just cold.
Ideally I'd like the mode shown as it is doing something. It would also be very cool if we were able to control that mode setting from the plugin.
It is really too bad HVAC controls are so rudimentary.
In the following snip you can see that the Humidity device has not updated for several days. The actual humidity is at 38% on one of my Aeon MS5's which is about 15 feet away.
Attachment 56430
I also wanted to ask if an enhancement was possible: In that picture you'll notice the fan is on, however the HVAC Status is idle which is not accurate.
The HVAC system is in a mode that I refer to as Equalizing or Recirculating using the fan only. My mode is in heating but it will only come on at the setpoint however it performs equalization in between the heating or cooling cycles. For the summer I have this mode set to run 1/2 hour/hour. It cycles cooler air from the basement throughout the house and has helped make the house comfortable with minimum use of AC. In winter it makes for an uncomfortable house because it blows cooler air so the perception is just cold.
Ideally I'd like the mode shown as it is doing something. It would also be very cool if we were able to control that mode setting from the plugin.
It is really too bad HVAC controls are so rudimentary.