So, I'm having a couple issues here. I'm pretty new to this plugin, and still trying to get the hang of things. While adding an open/close sensor to my devices, I accidentally linked it to an on/off module (I'll be perfectly clear here, I didnt read directions on how to pair battery devices, and was just messing around).
Here is the state I'm in currently, both devices were added to HS just fine, but the open/close sensor doesnt report a correct status (or a change of status for that matter) ever. All it does it turn on the on/off module when it opens. How can I unlink these two devices? I tried the following from the open/close sensor documentation:
Any tips?
Here is the state I'm in currently, both devices were added to HS just fine, but the open/close sensor doesnt report a correct status (or a change of status for that matter) ever. All it does it turn on the on/off module when it opens. How can I unlink these two devices? I tried the following from the open/close sensor documentation:
Code:
1) Open Open/Close Sensor cover and ensure jumper is uninstalled (or removed)
2) Move Open/Close Sensor magnet away from main case, putting it in open state
If Open/Close Sensor was closed, LED will blink once
3) Unlink desired responders from scene 1. See Unlinking an INSTEON Responder from Open/Close Sensor.
Responders will no longer respond when Open/Close Sensor is opened or set button is tapped
4) Move Open/Close Sensor magnet close to main case, putting it in closed state
Open/Close Sensor status LED will blink once
5) Unlink desired responders from scene 2
Responders will no longer respond when Open/Close Sensor is closed or set button is tapped
6) Test by opening and closing your door or window
Responders will no longer respond when Open/Close Sensor is opened or closed