MyDevices Cayenne
Has anyone tried hooking their PI / Arduino to this service? http://www.cayenne-mydevices.com/ Looks interesting - any info? If it's wet this weekend, I might give it a spin! Cheers Scott
View ArticleUpgrade from HS2 to HS3
Hi! I am about to upgrade to HS3 and decided to start from the scratch. I use HS with: 1x Ocelot 1x XM10 5x SECU16 1x KR22E 1x V572A 1x SC9000 5x SD90 11x SW10 Things that are currently controlled by...
View ArticleFibaro Dimmer 2 - start of a long journey!
I'm at the very start of my home automation! I've an old house that is about to be completely rewired and I'll then be putting automation in. I figured you don't really know what you want and what is...
View Articleupdate
Should all events have a "UPDATE" command at the end of the event or is it not required.
View ArticleSending e-mail macros?
When sending an e-mail via an event is there any way to extract the event details via text macros? As in, sending e-mails from motion sensors and including the text of the sensor. I'd rather avoid...
View ArticleZ-Wave controlled valves
Currently I'm working on a Z-Wave controlled garden irrigation system. I'd like to have it a s clean as possible and the easy integration with Homeseer. Even I don't have easy access to ethernet in my...
View ArticleEngravable AND backlit mutli-function Z-wave switch?
In my quest to find wife-acceptable switches and multi-controllers, I'm hoping someone can recommend a multiswitch, like the Cooper RFWC5, that has the ability to have custom buttons engraved AND then...
View ArticleLooking for HomeSeer consulting?
Hi Guys, I have my system setup and working (for the most part), but cannot figure out the naming conventions, how to setup a scene (or is it an event), and the using the HS3 Touch home screen is not a...
View ArticleSlave Switch not Working
When i had HS2 the slave switch for my floodlights worked fine I upgraded to HS3 and associated the slave to the main but the slave will turn off the lights but will not turn them on Any Thoughts??? It...
View ArticleHow to adjust settings
Mike, I am watering based on calculated ET. Each watering cycle moisture is increased by a fixed % (not topped off to 100%), and cycle length is fixed. During the summer it does not water enough,...
View ArticleI like this.
lots of WAF capital with this. Overnight guests finally have are no longer confused about how to turn on and off the lights in their room.
View ArticleCyclic timer?
Hi! One of my clients bought homeseer with plcbus plugin. Everything works perfect by now. Now, he wants to automate one of his appliance modules to turn on and off on a very basic schedule. He wants...
View Articlecyclic timer?
Hi! One of my clients bought homeseer with plcbus plugin. Everything works perfect by now. Now, he wants to automate one of his appliance modules to turn on and off on a very basic schedule. He wants...
View ArticleZ-Wave Data object 0 failed to be updated or added to the database
I'm getting these errors in my HS startup log. Everything has been running fine for months. It started with the last update (not today's which I'm going to wait a few). Anyone here of this? I heard...
View ArticleUsing multiple pi3's
Is it possible to connect remotely to a raspberry pi, and access the mpio port? I've had a search, I can see how to install HS onto a pi, do I need to install HS onto the pi, thus requiring another...
View Articlereplacing (faulty) Z-Net
I have to replace a possibly faulty Z-Net. Its still working, but has frequent disconnection issues. I do not believe its a hardware issue, but HS tech support suggested swapping it and as it was a...
View Articledevicelastchange question in a script
//ELAPSED TIME im building a very huge script and i need this option for my voice system if its possible.. i have an script that gets the status of all my pir sensors . but i want that it get the last...
View Articleplugin download ?
Hello, I seach an access to plugin HomeKit for Homesser developped by Fraggel. Is it free or paid ? If it is free, can you communicate me the URL for download ? Thanks.
View ArticleHS3 + TEMP08 + HobbyBoards Humidity sensor = a few problems
Hi, I am upgrading to HS3 and testing it with TEMP08 and a single HobbyBoards Humidity sensor connected. I used HyperTerminal to run "INI" and "TMP" commands and TEMP08 recognized all sensors...
View Article
